Flood surface with xs-327 concrete countertop sealer and work into the surface using a high-density foam roller until the surface is saturated. If allowed to sit more than 12 hours, the surface will need to be sanded with 220 grit sand paper to ensure proper adhesion. This sanding will ensure not only a good bond between coats, but also eliminate any imperfections, debris, or dust that may have settled onto the first coat as it was drying. They recommended you get the humidity up to 70-75% and approx 75 room temp.

Once cured you will need to sand the surface (not into concrete) to remove blemishes.

Backroll the surface with a relatively dry roller using only the weight of the roller. After mixing another batch to full catalyzation, dilute catalyzed product at a rate of 2 parts water to 1 part sealer. Once the first coat is dry to the touch, the surface is ready for the second and final coat of sealer. Apply countertop sealer in similar fashion to first coat with an even coating and again back rolling to prevent roller marks. If allowed to sit more than 12 hours, the surface will need to be sanded with 220 grit sand paper to ensure proper adhesion. Any standard concrete must be sufficiently cured to have complete hydration, approximately 14 days depending on temperature & humidity.

If first coat has cured beyond 12 hours, it must be sanded with 220 grit sandpaper by hand or with an orbital sander. Dilution of product remains 2 parts water to 1 part catalyzed mix (2:1). Trying to make a decision on the stain under the sealer and was wondering if this was a common issue.

AFM SafeCoat Safe Seal by greenbuildingsupply.com

This product can be sprayed with a garden type pump sprayer, brush or roller. Along with new flooring (formaldehyde free) my health & breathing improved dramatically. Whether you’re remodeling or building a new green home, you’ll find our experienced eco-advisors can help you choose the safest alternatives for your home.

It did a very good job of suppressing the smell that had bothered me so much. We specialize in products that are safe for everyone—including the chemically sensitive—as well as safe for pets and the environment. Answer a few simple questions and we’ll get you the right type of flooring for your project.

Stone Savior Sealing Slate… by stonesavior.com

The right sealer will penetrate into the pores of the slate to fill them and create a barrier to prevent oil, water and other liquids from getting inside, while still allowing the slate to breathe and expel moisture vapors.

For best protection, it is recommended that your slate surfaces be sealed every 1-2 years. If the stone absorbs sealer quickly, apply another coat immediately. Apply sealer using either a clean lint-free cloth or a rayon mop and let penetrate for 5 minutes.

Sealing is essential to maintaining healthy slate countertops, vanities, floors and surfaces. It’s the most effective way to protect any slate surface from harmful oils and undesirable staining without affecting the natural beauty of the slate. After your surface is clean, wait about 6 hours for the surface to completely dry. After your floors are clean, wait about 6 hours for the floors to dry before applying the sealer. Floors may be walked on after 12 hours, however for best results, 24 hours is recommended.

It’s also non-toxic and non-hazardous, making it safe to use around food, children, and pets.

SureSeal Stone Sealer by suresealusa.com

Extreme weather conditions, harsh cleaning methods and high-alkaline or solvent-based cleaners will affect the life expectancy of this product.

To maintain the natural beauty of this porous material it must be protected. This invisible impregnating sealer is absorbed into the interior of the surface where it acts as a repellant to prevent damage while allowing the stone to breathe and release moisture, thus stopping damaging effects of efflorescence and freeze thaw. Expected wear is up to 5 years depending on the use, and maintenance of the surface being protected. It is user friendly and economical for both the professional contractor and “do-it-yourself” handyman.

Slab Granite Countertops: Sealing Slate Countertops by slabgranitecountertops.blogspot.com

An amazing job sealing my granite kitchen countertops, and restoring the shine.

The color-enhancing sealer will also give the slate tile countertop a wet look.

Find countertops in every material quartz, butcher block, granite countertops and. We can help you protect and maintain your fine stone floors, countertops. Mineral oil will darken the slate tile and provide a sheen like when the stone is wet, but again it won t by glossy.


Leave a Reply

Your email address will not be published. Required fields are marked *