But all those fires can take a toll on the appearance of your fireplace and leave it looking worn, weathered, dirty, and unattractive. This product is fast, effective, and virtually effortless, which is why our customers love it! The curing process takes about 6-12 hours, but the results are well worth the wait. Are smoke stains taking away from the enjoyment of your fireplace and the beauty of your home?


This Is How You Clean Soot And Smoke From Your Fireplace | Duration 1 Minutes 18 Seconds

If you’re thinking about a complete fireplace renovation, call on our experts for this chimney and fireplace service upgrade!

If you miss the beauty that your fireplace once had and you’re frustrated with the dark smoke stains that cover your fireplace face and hearth, we can help. Once the product has dried to a rubbery film, it will be carefully peeled away to reveal a beautiful, clean fireplace.

Start Here For Cleaning Marble Walls Floors and Countertops by howtocleanmarble.org

You’ll find guidance for the best marble sealers and cleaners and what you need to know about identifying and removing stains from marble. Want to know how to remove smoke from a marble fireplace surround or a marble cemetery headstone or grave marker? Rarely are you provided a “handbook” for marble care as you would a product manual for let’s say an appliance. Before you can take the proper steps in how to clean anything made from marble you need to understand a little about this century’s old natural stone itself.

But before being quarried for later shaping into artifacts and architecture with its beautiful veining and patterns, it began as simple limestone. It was this metamorphosis that altered the crystalline structure of the limestone while introducing foreign materials responsible for marble’s color variations and veining. Granite is the result of molten volcanic magma which was formed and then cooled also deep beneath the earth’s surface.

This site will answer your questions and provide tips for cleaning a marble shower, cleaning a marble floor and how to properly care for marble countertops. Whether you’ve selected marble as your natural stone of choice when purchasing a new home or remodeling an existing home, oftentimes guidance on its cleaning is overlooked. This limestone, over time, achieved a metamorphosis of sorts from a combination of intense pressure and high temperatures deep within the earth’s crust. Even though some granites have veining similar to marble, its dense graining makes it the harder (and the stronger) of these two natural stones.

How To Remove Stains Around Fireplace – by goodhousekeeping.com

But most surfaces, including slate, need to be protected from stains. The white rings on your hearth were most likely caused by a chemical reaction. If this is the case, you may be able to remove the stains by reapplying the same sealer and simply wiping the marks away. In the future, clean your slate regularly by wiping with a fresh cloth and water.

Always put a dish or container underneath pots to catch water and prevent leaks.



How To Clean Soot And Smoke On A Fireplace Surround From Today’S Homeowner Video Channel | Duration 1 Minutes 17 Seconds

A fertilizer you may have used for the flowers leaked onto the slate, perhaps, and interacted with the stone’s sealer. If the stains are very severe, however, you may not be able to remove them.

Marble Fireplaces by finesgallery.com

Intricately carved floral patterns accentuate this for almost every decorating style.

We appreciate you interest with this product and our sales team will look at your suggested offer for this product. Note the lavish floral details hand carved into this gorgeous marble. Two tones of luxurious marble, one gold toned and one radiant white. A classic white traditional style bolection style surround carved from natural ‘classic white’ marble.

Beautiful white marble is the perfect display for the rich artistic detail. We appreciate you interest with this product and our sales team will look at your suggested offer for this product. This hand carved work of art is ornately decorated with heavy relief detail throughout the frieze. This elegant cream fireplace is hand carved in great detail from a light cream marble.

Cleaning Fireplace Soot From Brick Or Stone by tips.simplygoodstuff.com

The mantle, the firebox and every other area can become dingy and ugly over time. Creosote, a flammable tar like substance, accumulates in the chimney and flue and can be hazardous if it is not removed. When cleaning your fireplace, sprinkle damp coffee grounds over the cooled ashes to keep down the dust. Each of these methods is either too much effort, or too dangerous to be considered a good way to clean. All of the previous methods involve using a stiff brush to scrub away the soot. Since there are no harsh ingredients, you never have to worry about where you use it, and since it works so well, you will get amazing results quickly and easily. Removing this stuff first will reduce the time it takes, and allow you to get down to the real problem, all of that black and brown coloring that is ruining the look of your beautiful fireplace.

For this mess it will be easiest if you have a supply of full strength paste, along with a bottle of all purpose solution in a spray bottle. You will want to dilute down 3 tablespoons into a quart spray bottle of water. One is to wet the area you are going to clean, and the other is to begin adding on the cleaner. This can be anything you want like a scrub brush, or abrasive sponge. The tool you use will depend upon preference and the surface you are cleaning.



How To Remove A Stain From Natural Stone | Duration 4 Minutes 43 Seconds

Take your brush, sponge or cloth and apply the cleaner sort of like you are waxing a car.

For more severe looking fireplaces, you will want to wait 30 or more minutes. It will break apart the black stuff and make it easy for you to remove completely. If you are cleaning an area outdoors, then this job is easy, but if you are inside you need to be a bit more careful. You may want to use your brush or sponge again, just to help it along.

The towel will get totally dirty as your brick or stone fireplace begins to look better and better. For tougher build-up, or if it has been a long time, you will probably want to go over it again for best results. This particular stone has probably never been cleaned prior to this, and there was very little soot or smoke staining left on the rocks after going over it once. Buy it for your fireplace and use it everywhere else when you are done. It is totally safe around children and pets, yet works better than virtually anything else on the market. If you are not happy, or it doesn’t work like we say it does, you can return it for a full refund. Do yourself a favor and rinse any area cleaned very well with water. It is totally safe for exterior brick or virtually any other surface with this type of build-up. The all natural formulation is gentle on surfaces and tough on stains at the same time. If the black stain is really bad then you may need to resort to the paste full strength, but in most cases, the spray and wipe method will work just fine.

Sure would be nice to get some feed back from the consumer, instead of ‘promises’ from the seller.

Most people think this is an impossible cleaning chore due to the dark black stains and the surface they are on, but as with any job, if you have the right tools, it is easy. Give your fireplace and its accessories routine cleaning throughout the wood-burning season to eliminate an accumulation of soot, ashes, and creosote tars. Make sure all the embers have been extinguished for at least 12 hours. Many contain dangerous chemicals that will leave a flammable residue. Rub mixture into brick surface with cloth; allow to dry at least ten minutes and remove with stiff brush. You are using alkali and a mild abrasive to remove the greasy soil.

Rinse “gook” away with warm water, then finish off with a medium to strong detergent and rinse again with warm water.



How To Remove Rust Stains From Natural Stone, Marble, Granite, Travertine, Limestone | Duration 5 Minutes 2 Seconds

This is a very strong solution; avoid getting on skin, carpet, or fabrics. Using a scrub brush and water would produce similar results because it is the elbow grease doing the cleaning.

There are no chemicals or harsh substances involved and you won’t have to drive yourself crazy scrubbing either.

You don’t have to worry about it ruining anything you use it on and it is so safe you don’t need to wear gloves when you clean with it. You can use it on any part, inside and out, and it even works on metal racks and pokers too. Use a vacuum or broom to remove any loose particles from the area you are going to clean. Once all of the problematic chunks have been escorted off the scene, it is time to get your cleaner ready. To make this solution, simply melt some paste on a low setting, or use the convenient liquid concentrate. This will mix to form an all purpose spray that you will use to prep the area, but you can also use for any type of regular mess all over your home. Once you have done this, you are going to want to switch over to the paste, and some sort of abrasive tool for application. You may even want to use a toothbrush or something small to get into crack and/or grout lines. If you have a smooth marble fireplace, you probably want to avoid the brush and go with something like our scrubbing cloth that is able to scrub surfaces without harming them. This is a pretty nasty stain to clean in most cases, so you need the paste, and you will want to apply it liberally.

Use circular motions without really scrubbing until the whole area is covered. For minor staining, let the cleaner sit on your brick or stone for about 10-15 minutes. It can be tempting to just scrub away like you do with regular cleaners, but this will only make your job harder. For outdoor cleaning, simply take your hose or a bucket of water to rinse the area and flush off all of that soot, tar and dirt.


Removing Smoke Stains From Brick Wall With Sandblasting | Duration 41 Seconds

If you are indoors, the easiest, and least mess prone way to go is using a damp terry cloth towel. The heat will increase the cleaning power of your quick n brite and make things a little bit easier. You will see, right away, that the black stuff will come off of your fireplace and transfer to the towel. For regular cleaning, this will do the trick and make the surface look like new. If there are many layers of staining and soot built up on your fireplace, it is possible that it will take 2-3 applications to get it perfectly clean. The pictures on the left are actual photos that are not in any way doctored.

If we had applied it again, we could have gotten the stone even cleaner. All areas are lighter in color, and more natural looking now that the layers of black gunk have been washed away.

If we had applied the cleaner another time it would have completely removed decades of grime to fully rejuvenate the look of each part. It will deep clean, but you don’t have to worry about it ruining the surface. This cleaner is extremely safe to use, and you don’t have to worry about wearing gloves, or breathing dangerous fumes. It is safe to use on any surface you can get wet with water, and is chemical-free and non-toxic so you don’t have to worry about it damaging any surfaces. I want to use something safe that will work, but not damage my brick, because it would be very noticeable. Even if the residue doesn’t catch on fire, it may heat to release dangerous gases once you burn wood. Let it sit for just a bit and then take a damp microfiber cloth and wipe it clean.

You would use the same procedure as above, and you will end up with the same great results.

Sources:

Leave a Reply

Your email address will not be published. Required fields are marked *