Keep slate clean by understanding the proper way to take care of it and using the right cleaning products. Wipe the slate with a damp paper towel to remove dust and large pieces of debris. Allow to stand for five to 10 minutes before scrubbing with a non-steel-wool scrub pad. Apply the fizzy cleaner to the stains either with a sponge or with your spray bottle.


|
Youtube Channel:Stone and Tile PROS

Boil about a cup of linseed oil and apply the oil to the slate with an old towel. Keep slate clean by regularly wiping it down with a warm, damp cloth. Place dishes or containers underneath potted plants to prevent the pots from staining the tile.

Keep slate clean by understanding the proper way to take care of it and using the right cleaning products. As with any stain, the quicker you attend to it, the better your chances of removing it completely. This will prevent dirt and other debris from getting mixed in when cleaning. Mix a solution of equal parts water and hydrogen peroxide in a spray bottle and spray the solution onto the stains.

Make a paste of equal parts baking soda and hydrogen peroxide if the stains have not been lifted. Allow to stand for about 15 minutes, then wipe up the solution with a warm towel. Attend to spills as soon as possible; use blotting paper for best results.

4 Ways To Get A Cooking Oil Stain Out Of Clothing by wikihow.com

Oil stains will happen one time or another, whether you are frying something or eating a salad. If you don’t have any baking soda, try using some cornstarch instead. You may have to repeat the baking soda step for tough stains. Hot water helps remove oil stains, but not everything can be washed in hot water. If the stain is still there when you put the garment into the dryer, you will risk setting the stain. If you can’t, let the garment air dry, and take it to a professional dry cleaner. The dyes in paper towels are treated differently than plain paper towels.



Stain Removal On Marble, Limestone And Marble/Concrete Agglomerate With Oxidan + Margel | Duration 2 Minutes 26 Seconds|
Youtube Channel: FaberTileandStoneCare


They’re both effective for cleaning, but you do want to aim for plain paper towels when cleaning oil spills on clothing. Because of this, you will need to take extra steps to remove oil stains from sweaters. You will be soaking the sweater in water, which could cause it to lose its shape.

For a large, bulky sweater, try using a tub or large basin instead. Keep draining the old water and soaking the sweater in fresh water until all the soap is gone, and the water is clear. Put the sweater back onto the sheet of paper and stretch it until it’s back to its original shape. Cover the stain with the solution, and tap it gently with an old toothbrush. Do not leave this solution for too long on the wool, or you may discolor the fabric. Try the cornstarch oil-removal method a few times and only move onto the next steps if it is ineffective. Unfortunately, the heat of the dryer would have set the stain into the fabric.

The cardboard will prevent the stain from sinking into the back of your garment. Keep scrubbing, dusting, and adding new baking soda until you get no more clumps. If it has completely soaked into the fabric, add a little bit more.

If the stain is still there, let the garment air-dry, and try the method again. This might be the only step you need to take to get your stain out. Instead, cover the stain with baby powder, cornstarch, or talcum powder. Keep repeating this step until the powder no longer clumps up and the stain is gone. Instead, sprinkle some baby powder, cornstarch, or talcum powder over the stain. Instead, toss the garment into the washing machine, and was as usual according to the tag. Hairspray contains alcohol, which will help loosen and dissolve the oil.

Soak the stain with some hydrogen peroxide, then sprinkle a thick layer baking soda over it. Scrub the entire area with a toothbrush, then let it sit for 30 to 60 minutes. Instead, wash the garment as you normally would in the washing machine. Instead, toss the garment into the washer, and wash according to the instructions on the tag. Start by blotting up the excess oil, then cover the stain with the stain remover.

Even set-in stains are possible to remove, with a little bit of effort.



How To Stain A Cast Stone Fireplace From 01tutorials.Com|
Youtube Channel: Life in the king family


Try to use a plain, white paper towel, or you will risk transferring dye to the garment.

Let the baking soda sit for 30 to 60 minutes, then scrub it out with an old toothbrush. Simply add more baking soda, wait another 30 to 60 minutes, then scrub it out. Try adding 1/2 to 1 cup (118 to 237 milliliters) of white vinegar to the wash cycle. Hot water is ideal for removing stains from fabric, but it can destroy a sweater.

Put the sweater down on the paper and trace it with a pencil or pen. You will need to stretch the sweat back out to its original shape. The sweater will need to be completely submerged, so make sure that the water is deep enough. Pass your hand through the water a few times to mix everything together. The dish soap will help break up the stubborn stain, and remove it. Do not wring or twist the sweater, or you may ruin the shape and fibers. Drain the dirty water and fill the sink with fresh water so that you can rinse the sweater. Once the water is clear and the soap is gone, lift the sweater out of the sink and let the water drip out. Gently tug on the sleeves, hem, and sides, until everything matches up with the outline you drew earlier. This means that you may need to take the sweater to a dry cleaner, hand wash it, or put it in the washing machine.

Twisting or wringing a sweater can easily ruin the shape and the fibers, which you definitely don’t want! Sometimes, you don’t notice oil stains until after you have already washed and dried the garment. Try to cut the cardboard several times larger than the stain, in case the stain spreads. Dust off the old, clumpy baking soda, and sprinkle on some new baking soda. You will probably end up with lots of white powder everywhere. Some fabrics, such as silk and chiffon, will not hold up well to harsh scrubbing and hot temperatures.

Leave the garment in a dry, warm place for a few hours (overnight if necessary), then brush the powder away.



Fireplace Stone Effect Paint How To Create A Stone Fireplace | Duration 1 Minutes 48 Seconds|
Youtube Channel: StoneLux


This means that you cannot use things like dish soap and water to remove the stain. Sprinkle some cornstarch over the stain and let it sit for 30 to 60 minutes.

You can also try using cornmeal or cornstarch on its own, without the dish soap.

Wash and dry the garment according to the care instructions on the tag. Cover the baking soda with some dish soap, and sprinkle on a light layer of more baking soda. If you are worried about this, it might be a good idea to test it out on an inconspicuous area, such as a hem or cuff. Use an old toothbrush or a manicure brush to rub the stain into the fabric.

Soapstone Stove Top Kettle by hearth.com

I have seen a photo of a kettle that had been oiled with veggy oil or something and it looked nice and dark, shiny, and with good patterns. Careful not to lick your fingers though it is highly laxative. The oil will likely wear off quickly given the direct heat of the stove. It was kind of gummy at first, but after the rubdown it was smooth. As it turned out, we didn’t see any affect on the stove from the sploodges. Over time, the oil cooks away, and the whitish look begins to return.

After it cooled, we wiped it down with a terry cloth rag before using. We tried not to get any oil on the bottom, thinking the oil might stain the stove, but nonetheless we had some sploodges on there when we were done. The first time we got it hot on the stove it smelled a little like canola oil, but thereafter we didn’t smell anything. We like the oiled look so we re-oil when that starts to happen, but my bet is if we stopped the periodic oiling, the steamer would eventually revert to its original appearance.


I had to glue on a chunk of the lip that broke off in transit and the buffing gives me an oppurtunity to blend that in as well. I set up some newspaper on the kitchen table and started scrubbing. It had noticably darkened but only a little bit and there was a noticable shine to it but nothing mirror like or even close to the polish job on the stove. Holy smokes, that was the trick, it must have washed out the loose talc. They told me that the 0000 is the final rub down they use on their soapstone in their stoves. There must be some sort of block sanding or tool used at the factory with a flat abrasive holder since the surface is both flat and glossy.

These kettles are delivered with a non polished, turned finish that is not polished like the stove so it looks funny.

I hoped that the water inside the kettle might darken the kettle but that isn’t happening. It should bring out the color and luster in the soapstone quite a bit.

Don’t use vegetable oils as they go rancid and would probably smell funky if heated and rancid. After it cooled, we wiped it down with a terry cloth rag before using. We tried not to get any oil on the bottom, thinking the oil might stain the stove, but nonetheless we had some sploodges on there when we were done. The first time we got it hot on the stove it smelled a little like canola oil, but thereafter we didn’t smell anything. We like the oiled look so we re-oil when that starts to happen, but my bet is if we stopped the periodic oiling, the steamer would eventually revert to its original appearance. It was kind of gummy at first, but after the rubdown it was smooth. As it turned out, we didn’t see any affect on the stove from the sploodges.

Over time, the oil cooks away, and the whitish look begins to return.

I did notice that the features or grain of the stone were becoming apparent and showing. The kettle is now the perfect permanent darkness about halfway between chalky new and oiled as in chimneysweeps pics. It is far too coarse and removes far too much stone material to use without extreme caution. Soapstone has soft spots and hard spots meaning you won’t get a level finish because the steel wool wants to hog out the soft stuff.



Staining A Stone Wall/ Fireplace | Duration 7 Minutes 5 Seconds

Canola Oil by hearth.com

That is one of the most heavily debated controversies regarding chainsaws and not a single person has ever been able show a shred of evidence that running used motor oil is a bad thing. Without causing too much of a thread-jack, do you have any new evidence to add to this controversy? Also it kinda seems that running a quart of used oil through the saw and dumping it on the ground near the log are kinda the same thing?

That is one of the most heavily debated controversies regarding chainsaws and not a single person has ever been able show a shred of evidence that running used motor oil is a bad thing. Without causing too much of a thread-jack, do you have any new evidence to add to this controversy? Nobody seems to care if you run used oil in your saw but they damn sure get agitated if they see you dumping it on the ground.

How Do I Get My Marble Hearth Nice and Clean and Shiny? by uk.answers.yahoo.com

This is probably not practical with your fireplace unless you can take it apart and have big enough containers for the parts. You can also try “sugar soap” which is a highly alkaline soap/detergent or maybe it’s called “lye soap” where you live. Unfortunately years of smoke and soot will have been absorbed by the marble and it may never be “as new” clean.

The good thing is that it doesn’t cost anything and your not using harmful chemicals.

These dissolve marble and your fireplace will lose any polish it has. In the absence of a proprietary marble cleaner, try scrubbing, soft brush, with a sludge of laundry detergent powder in water. Leave the detergent sludge on for a while, maybe an old wet towel over it to keep things damp as long as possible and repeat as required. Marble is a very soft rock and is very porous, so do not apply any highly coloured material or you will have to get that out as well. Also, acidic products, including vinegar should not be used on marble.

The plans are clearly drawn and there’re step-by-step explainations of how the plan should be done and put together. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Get Rid Of Oil Stains On Garage Floor by garagefloorpicture.com

When you’re done breaking it up, sweep up and discard the dry litter. From your car leaking oil to bicycle chain grease, oil soaks in and leaves a big messy stain. You should always wipe up any spills from marble as soon as you see them, but if you miss one, don’t worry! Whether the oil is spilled during an automotive repair, while fixing household items or enjoying a hobby, it can result in a dark, discolored stain on your concrete. Oil stains are one of the most common problems encountered in maintaining a driveway. To best remove the stain, place a layer of several paper towels over the wet area of the carpet. Because of the delay, try to anticipate when youll need more and mix the next gallon before you run out. Use your hands or a toothbrush to work the liquid dish soap into the stain.

If you’re looking to cut some of the time, cost, and stress out of your cleaning routine, start with these 21 tips. Because these liquids are all different, cleaning techniques vary slightly from fluid to fluid and surface to surface.

For very heavy stains, let the kitty litter set overnight after crushing, then sweep and dispose. No matter what method you use, the sooner you clean your oil spill, the better your results will be. After the litter absorbs the oil, walk on the litter to grind it into the ground, like a scrub brush. Finally, use a concentrated detergent and a stiff brush to scrub the area. It may seem like your garage floor will forever be tainted with that oil stain, but there’s actually a few ways you can get rid of oil on your concrete floor. Rust and oil are common on concrete floors and general cleaning may or may not remove them.

Stains like oil and rust may not be a worry to you, depending on how you use the floor. Our crews are ready to help you with your dream epoxy garage floor, waterproof deck, polished concrete floor or any of our other amazing services.

Most people will use cement to build their garage floor rather than sand. The epoxy 2-part, water-based formula provides ideal protection and the high gloss sheen in gray offers a handsome appearance. Includes ideas on how to use degreasers and other product to remove oil stains from concrete driveways, garage floors, patios, etc. Avoid using a wire brush — you’ll probably end up scratching the concrete or removing some of it. There are several methods for cleaning these stains, though the size of the oil spill and length of time the stain has had to set will determine the process for removal. Soap products leave a dulling residue and can cause the floor the become slippery when wet.

And if you want to finish your floor with a coating, it’s essential to get rid of oil deposits for a good bond. After the litter absorbs the oil, walk on the litter to grind it into the ground, like a scrub brush. Finally, use a concentrated detergent and a stiff brush to scrub the area. The recipe is safe and won’t damage the surface you’re cleaning. Whether you are being forced to remove these stains by a landlord or simply want to make your driveway look new again, there are a couple tried and true methods that will work flawlessly.

Every year fires break out in workplaces across the country resulting in serious damage to property and even injury and death. Scrub at the stain with a stiff brush and use a garden hose to rinse away the suds. Oil stains not only indicate that your car needs to be serviced, but they can also visually mar your property. Marble is a beautiful stone that can be used for tabletops and countertops, but it can become easily stained because of its porous nature. Let us amaze you with what your garage can become and turn your garage into the talk of the neighborhood, we offer the best solution for your garage floor coating needs. Either way, the urine must be pulled up and peroxide does the trick. Oil stains are a common occurrence on concrete driveways and garage floors. You may have to repeat this once or twice, but the process is extremely. Since the driveway is the main passageway for vehicles into our homes, it is very susceptible to difficult-to-clean oil leaks. Includes ideas on how to use degreasers and other product to remove oil stains from concrete driveways, garage floors, patios, etc.

If the urine dries, it stains the carpet and increases bacteria growth.

The same is true about animal urine stains and rust — but what you have to know is that it doesn’t clean the dirt immediately. Use a large bristled brush, add some elbow grease, and start scrubbing. Once absorbed, the next step is removing the oil stains from your driveway or floor. There are several methods for cleaning these stains, though the size of the oil spill and length of time the stain has had to set will determine the process for removal.

To prepare the epoxy, we thoroughly mixed the two parts and let it sit for 30 minutes. Whether the stain is new or old, there are some basic steps to help remove marks left by leaked fluids from a paved driveway or an uncoated concrete garage floor. Soak up as much of the oil as possible as soon as you can using newspaper. Removing motor oil and grease from hands can be a difficult feat, but with a few simple steps your hands will be clean again. If that fails to satisfy, buy or rent a pressure washer and clean the whole thing.

When you’re done breaking it up, sweep up and discard the dry litter. Apply bleach to the stain (using a spray bottle is the most efficient way to apply bleach). Avoid getting bleach on your clothing as it will stain, and avoid contact with skin and especially eyes. But your worst nightmare occurs and there are residual spots and stains. Keep scrubbing, adding more solvent as needed, until the paint is gone, then let the solvent evaporate.

How To Get A Stain Out Of Limestone by ehow.co.uk

You can change your mind and change your consent choices at anytime by returning to this site. Similar to other natural stones, limestone is porous and absorbs stains. Combine four drops of mild dish-washing detergent and 1/2 gallon of warm water. Scoop out the poultice paste with a spatula and spread it over the stain on your limestone. Allow the poultice to remain on your stained limestone until it dries completely, drawing the stain out of the stone as it dries.

Use vinyl or plastic place mats and table coverings to protect your limestone counter top from stains. She has been a writer since 1996, specializing in business, fitness and education.

The earthy look of limestone adds to the beauty of your home and lasts for many years when maintained and taken care of correctly. Wash off the surface of your limestone with the mild soap solution to remove as much of the stain from the surface as possible. Remove the stain from beneath the limestone surface with a homemade poultice.

Create a paste-like substance by drizzling on water for oil stains, hydrogen peroxide for food or wine stains and ammonia for mould and mildew stains. Continue to apply paste until the stain is completely covered with a 1/2-inch-thick layer of poultice materials.

How To Seal and Protect A Natural Stone Hearth by homeguides.sfgate.com

Because natural stone is made up of numerous, microscopic pores, ash, soot and other stains can go below the surface of the stone where they cannot be wiped away. A natural stone hearth, either in slab or tile form, can be permanently stained if not sealed on a regular basis. A good impregnating sealer fills those small holes to keep stains on the surface where they can be easily cleaned off. Use a stone cleaner and a soft cloth to clean the entire surface of the hearth.

Surfactants in soaps can break down the seal over time, which can leave the stone vulnerable. Granite, however, can frequently use a less intense sealer and still achieve the same protection. An unsealed stone will absorb some water or moisture during cleaning. Wait until the stone has returned to its natural color before sealing to ensure the pores are open and ready to receive the sealer. Overlap each stroke slightly, and fully saturate the surface of the stone. Let the sealer penetrate the stone for 10 minutes, then buff away the excess with a soft cloth. The sealer will emulsify itself, allowing you to buff it away in a few minutes. The type of stone, the type of sealer you use and the type of cleaner you use will all affect how soon the stone will need to be resealed.

On well-sealed stone, the water will bead up on the surface of the stone and will not darken where the it was applied. Check the hearth a few times a year for the first year to determine how often you need to reseal, until you know approximately how often it will need to be required.

A natural stone hearth, either in slab or tile form, can be permanently stained if not sealed on a regular basis.

Because natural stone is made up of numerous, microscopic pores, ash, soot and other stains can go below the surface of the stone where they cannot be wiped away. Granite is harder and denser than marble, which is harder and denser than limestone. For extremely porous stones, like limestone, special, deep-penetrating sealers made of silicone are necessary to fill all the holes. Look at the hearth from an angle to check for dry areas and ensure that you don’t miss any spots. To check the seal on the stone, sprinkle some water on its surface and wait a few minutes.

How To Remove Wax From Marble » How To Clean Stuff.Net by howtocleanstuff.net

If a candle has dripped beyond the holder or a spill has occurred, you can either remove the wax with heat or remove it with ice. It is best to use two layers of brown paper in case the wax soaks through the first layer.

It is best to hold the ice cube with a towel so it is easier to hold and to prevent your body heat from melting it as fast. Do not use a metal scraper or any other sharp tool as you do not want to scratch the marble. The ice can still be used to make the wax brittle, allowing it to release from the surface more easily.

There are several ways to remove candle wax, and most are safe to use on marble surfaces.

If using a paper bag, turn it inside out or be sure that any ink labeling is not against the marble. Once the wax is brittle, use a plastic scraper to carefully chip if off. Use caution to keep the blade moving smoothly across so that it does not dent or gouge the marble.

Sources:

Leave a Reply

Your email address will not be published. Required fields are marked *