Most of the lighter ones have a much coarser structure that translates into a rougher finish.

That affects the surface texture much more negatively than a few shedding crystals would. Granite sealers are penetrating sealers that soak down into the stone and do not affect the surface texture or make it resemble your grandmothers plastic coated furniture.

Why Is It That My Granite Counter Top Feels Rough? by ctasc.com

This is a slight textured finish that doesn’t substantially cause more maintenance. This normally does not happen to stone on countertops because there can’t be any underlying source of moisture.


How To Polish Granite Counters Like A Professional | Duration 20 Minutes 23 Seconds

Although, if your stone countertop was not a true granite and it was acid sensitive, it is possible that the surface can become etched from being subjected to acidic substances such as citrus products. Sealing the granite with a penetrating stone sealer can help make the stone more resistant to chemical if the chemicals are cleaned up promptly and with the appropriate cleaners.

Lately, some quartzite and granite countertops are fabricated and installed with a leather finish. Granite that is installed on concrete floors on ground and subjected to prolong moisture can spall, which is a form of the surface deteriorating and will give it a textured feel. I have seen on granite countertops that were recently installed that the installers were a little sloppy with their clear epoxy as they glue various pieces together, and it leaves a textured surface in those spots. The stone surface can be re-polished to remove the etched stains.

How To Use A Polishing Stone To Smooth Granite Edges by homeguides.sfgate.com

Hold the flat edge of the polishing stone at a 45-degree angle, rubbing the rough area across the edge of the granite.

Switch to a 25-degree angle if you plan to smooth out the rough edges by making them slightly round. Replace the polishing stone with a resin-bonded polishing stone to finish smoothing the granite. It’s similar to changing from a rough-grit to a finer-grit sandpaper. Apply a buffing compound meant for granite to add a final sheen to the surface. Coat your granite countertops with a sealer every year to add a layer of protection.

Rub the stone in one direction across the granite edge, as you can usually maintain the angle much better this way compared with rubbing back and forth. Alter the angle between these two degrees until you have the edge and smoothness on the granite that you desire. The resin-bonded stone providers a finer grit than that offered by a standard polishing stone. Use the same method for machine-polishing with the diamond-grit pads as you do when using a polishing stone. This can slow down the rate at which stains can penetrate the granite’s surface. Wear your safety goggles to prevent eye injuries from flying bits of granite.



Marmomacchine Pellegrini Rough Surface Finishing Systems | Duration 3 Minutes

Stone Finishes Northern VA by nekainc.com

Simply select the slab you desire for your project and select the finish that suits your taste.

A honed surface finish you do not need to worry about etching as the finish is already dull as is. This treatment produces a smooth abrasion, leaving the material with a slightly scratched (but not rugged) surface. This finish is used primarily for exteriors applications where slip-resistance is extremely important. Leathered granite lacks shine and disguises fingerprints and smudges very well. It is buffed to the highest level possible, and the results are either a high shine or the actual highest level of shine that can be achieved naturally. The result leaves the surface of the stone fairly smooth with small indentations.

Any of the finishes below can be applied to the material you desire. Honed granite, marble or quartz is often perceived as being a softer more natural look than polished.

A flamed surface finish cannot be applied to all stones; however, most granite and certain hard limestone are preferred. Leather finish results in a rough, “river-washed” appearance and feels similar to a genuine leather material. This surfac finish gives the stone a very elegant and rich look, providing it with a pinnacle depth of color.

Because the head of the hammer is usually small (about 1-2 inches square) it takes a long time to apply this surface finish to a large surface area. A bush-hammered surface finish can be applied to nearly all stones.

Rough Ish Less Polished Mica Areas In Granite Countertop Can It Be Polished Better? [Archive] by johnbridge.com

However, could it be buffed or polished in some way to make the entire countertop smooth and reflective in a uniform manner or is this not entirely possible with some granites with mica and other formations in the stone? The stone can become etched enough that the sealer is compromised, allowing a stain. It is also very easy to use and leaves a very slight residue that can be simply buffed off with a dry cloth. The color will fade in the sun as any enhancer will do over time, but the sealing properties will remain.

I know the installers put a sealer on the countertop which is mostly smooth and reflective. Or how about a countertop that sees vinegar, lemon juice, traffic, etc.

Some will last, some wont, but we remove stains and reseal for no charge if there is an issue. I never offer a warranty on sealer for flooring, only granite counters, not marble or limestone etc. Usually these stains are very easy to remove, but its not realistic to expect a warranty. It has a very strong odor though and a respirator is strongly recommended. The formula has changed, but it is still good sealer and has no odor.



Stone Surface Finishes Granite Shorts Ep.17 Www.Marble.Com | Duration 4 Minutes 38 Seconds

It has no odor, residue is very easy to clean up, and it holds up to the elements well.

Natural Stone Restoration by mygranitecare.com

Will the acids in orange juice, lemons or soft drinks leave marks on my granite? Why is it important to identify the stain on my stone’s surface? First, if the stain is unknown and you attempt to remove it, you may be using chemicals that will not work. Calcite (the main ingredient in both marble and limestone) is prone to etching.

Mild etching still feels smooth and can be removed with a polishing powder such as this marble polishing powder. Will the acids in orange juice, lemons or soft drinks leave marks on my granite? It’s eating away at your polished surface and producing those rough dull marks that you see on the floor. If the etches are deep, contact a natural stone restoration professional. If water spots continue to be a problem, you may want to consider installing a water treatment system to reduce the calcium in your water. Natural stone restoration professionals have the knowledge, the experience, and the tools required to restore your worn stone to like new condition. They also remove deeply embedded stains and repair chips, cracks, and seams. We’ll continue to publish articles that are informative, reliable and easy to understand.

Or even worse, these chemicals could set the stain and make it permanent. Before applying any kind of stain remover or chemical, be sure you’re actually dealing with a stain! These “dull marks” are not stains – they are etches or surface damage.

When acidic substances come into contact with natural stones containing calcite or other minerals sensitive to acid, they etch – a dull mark is left behind. Common household items such as lemons, colas, ketchup’s, and even some cleaning products contain acids which cause etching. Wipe up accidental spills as soon as possible and use cleaning products safe for natural stone. If you have a granite that contains any calcite or minerals that are sensitive to acids, these acids might leave “etch” marks on your granite surface. Unfortunately, there is nothing on the market today that will repel acid. I recently had a polished marble floor installed in my home and now there’s dull spots on it.

If the etching is mild to medium, remove the dull spots with a marble polishing powder.
Natural White Marble Stone Name And Rough Rubbing Surface Finishing White Marble Block, View Rough Marble Block White Color And Polished Surface Finishing Marble Tile/Marble, Xindaxin Product Details From Yunfu Xin Da Xin Stone Materials Co., Ltd. On Aliba From Alibaba.Com

They can remove deep scratches, severe etching, and wear from the surface of your stone by using mechanical abrasion or diamond grinding. Yes, we would like to sell you our natural stone care products, but we also want you to be an informed buyer.

How To Polish Granite by todayshomeowner.com

If your granite has already been partially polished, you can skip the lower grits.

Unfortunately, the edges around the sink as well as the surface by the faucet became quite dull and cloudy. It was given to me but it required three men to carry it in my house because it is very heavy. If you have alot of edges, buy two 50 grit pads because those get used the most. Keep in mind the pads are diamond as well as diamond blade to cut the granite. The polishing pads were pricey at 10 dollars a peice and you need to buy the backing pad to use them on the 4′ grinder. The granit is light colored so it is hard to see when looking straight down on it but when the sun is shining and you are looking from an angle you can see the cloudiness. I have installed a soft-water heater but would like to re-polish the granite. You may just want to call another company to fix it which will probably cost the same amount as you buying supplies to do so yourself.

They came back several times to polish this but it still looks dull. I have had no luck in making the edge look the least little bit shiny. If you decide to give it a try, you’ll need to use a grinder or stone polisher equipped with various grit diamond pads (these may be rented at tool rental centers).

Be sure to wear the proper safety equipment including a dust mask, safety glasses or goggles, and ear protection. Despite the emerald in the name, the colour of our granite is more black than green. I applied a dab to a cotton cloth (old diaper) and used my index finger in circular motions from the outside edge of the stains toward the centre. Nonetheless the other areas that were stained/marked now look the same as the rest of my counter again… it’s been about two weeks.


Countertop Surface Finishes For Granite & Marble | Marble.Com | Duration 3 Minutes 15 Seconds

Is this going to require someone stripping down the entire countertop or can it be polished out along the edges where the cleaner was sprayed? Later, when your fabricator cut the slab, the freshly-cut edges were dull and less colorful than the top. Be sure to blue-tape the top in a nice, straight line before you apply the enhancer to the edges. Couple passes with each pad working from 50 grit up to 3000 grit then the buff pad. I would not recommend a homeowner trying on their own because it does take a huge amount of skill and good supplies.

Luna Pearl Granite Tile by stoneandtileshoppe.com

It has a density and hardness unparalleled by many natural materials, making it suitably resistant to everyday life.

Furthermore, it has a natural heat resistance, so a hot mug or plate should not mar the tile’s face. It is created by passing a searing hot flame across the stone’s surface causing it to crackle and burst.

The process also causes the stone’s colors to change, they become muted and delicate, creating a more natural looking tile. A flamed finish is more rugged and therefore can handle a higher level of use without the need for maintenance. There is much more grip on a flamed finish than there is with a polished or honed surface. If you’re looking for a sleek and modern interior, pair it with white kitchen cupboards. Therefore, we cannot guarantee the condition of our samples upon arrival. It has a pure white bedrock with evidence of clear and black crystals. Each medium-grained stone has its own unique balance of hues and just like all natural stones, no two will ever be identical.

Created by the rapid solidification of molten rock, it is incredibly durable.

It is not easily scratched, and therefore it makes a great countertop or vanity surface. This adds a slightly rough texture to the tile, a unique yet subtle effect. Therefore, if you’re looking for a stone suitable for a lively family environment, this flamed granite is a great option. Your home will feel light, bright, and airy – an exquisite interior that is timeless and durable.

It has a pure white bedrock with evidence of clear and black crystals.



Marble Or Stone Benchtop Polishing | Duration 1 Minutes 29 Seconds

Each medium-grained stone has its own unique balance of hues and just like all natural stones, no two will ever be identical. Created by the rapid solidification of molten rock, it is incredibly durable. It is not easily scratched, and therefore it makes a great countertop or vanity surface. This adds a slightly rough texture to the tile, a unique yet subtle effect. Therefore, if you’re looking for a stone suitable for a lively family environment, this flamed granite is a great option. Your home will feel light, bright, and airy – an exquisite interior that is timeless and durable.

It has a density and hardness unparalleled by many natural materials, making it suitably resistant to everyday life. Furthermore, it has a natural heat resistance, so a hot mug or plate should not mar the tile’s face. It is created by passing a searing hot flame across the stone’s surface causing it to crackle and burst. The process also causes the stone’s colors to change, they become muted and delicate, creating a more natural looking tile. A flamed finish is more rugged and therefore can handle a higher level of use without the need for maintenance.

There is much more grip on a flamed finish than there is with a polished or honed surface. If you’re looking for a sleek and modern interior, pair it with white kitchen cupboards.

Which Granite Finish To Choose by surface1.com

The finish is achieved by grinding the stone with fine abrasives to achieve a shiny appearance. Enhancing sealers can be used to bring out more nuances of the natural stone. If for any reason the surface becomes dull, most granite can be buffed and polished again to regain the shiny appearance.

Honed granite is non-reflective and therefore more subdued than polished granite. Honed granite is just as durable as polished granite and can benefit from periodic resealing. A leathered finish offers a degree of texture that many find appealing. The leathered finish is also slightly lighter than a polished finish, meaning that a stone that looks jet black when polished may appear as more of a dark grey when leathered. Despite the texturing, the surface is still mostly flat and will not be inconvenient as a surface for dishware. Some homeowners choose to use a high shine polished granite on an island or bar top as an accent and incorporate a honed stone on other surfaces in the room.

Honed granite is an excellent choice for kitchens or bathrooms that already include reflective materials or metallic surfaces. You will probably catch your family members and guests running their hands along your countertops to feel the surface, time and time again. Leathered countertops also hide fingerprints and water spots much more effectively than a polished surface, and they are not reflective. Leathered granite is a popular choice for bathrooms because it hides water spots.

Star Granite Company LLC. – by stargraniteofnh.com

This allows for a flat surface to mount the mailbox and bracket and semi-rough sides to add a house number.

The finish is the result of sawing the granite slab with a large diamond blade. A thermal texture accents the grain of the granite and pairs nicely with a split or rock pitch finish for mailbox posts.

The granite splits along natural fault lines within the granite to reveal a natural granite surface which is irregular yet not as pronounced as a rock pitch finish.

Our standard mailbox post has two split sides and two thermal sides. The feel is closely described as running your had along a piece of paper. The granite has a dull luster which is slightly lighter than a standard polished finish. Thermal texture is widely used on granite steps to prevent slipping that would normally occur with a sawed finish. A split finish can be lettered and is our recommended finish for mailbox posts. This finish maintains the natural rock texture of the granite but is slightly harder to letter with a house number due to the rough contour of the finish.

The side with the house number is on the split finish and the adjacent side with the mailbox and bracket is the thermal finish side.

All Granite Marble by allgraniteandmarblesarasota.blogspot.com

Thoroughly wash all granite surfaces with hot soapy water, wipe dry and leave the surface overnight so any remaining moisture evaporates from stone before you seal it.

The granite sealer penetrates into the stone to seal and protect the stone from absorbing grease and other liquids. Light color granites need extra coats of sealer these are usually more porous then dark granite. The granite countertops will need to be resealed once every 12 to 18 months depending on use. The same thing will occur if acidic fruits and vegetables are chopped regularly on the granite countertop. If water beads up on the countertop, then the granite still sealed. If the granite is noticeably darker in that area, then the granite needs to be sealed again. Polish helps keep the granite surface clean and protect until it’s sealed again.

Allow the sealer to set for one or two minutes depending upon the manufactures direction on the label. Some black granites are so dense in texture that sealing often isn’t necessary. Harsh cleaning products can cause the sealer to weaken and will need to be reseals more frequently. An easy way to tell in your sealer is working is to check for water absorption.

Another way to check is by laying a damp cloth on the granite and leave it overnight. Some granites will begin to feel slightly rough on the surface between polishes.

What Kinds Of Granite Finishes Are There? by granitemarblewa.com

This is the classic look for granite, and the best way to show off the natural luminosity of the stone. If you’re worried about a polished surface reflecting light too brightly or showing fingerprints and smudges too easily, you can choose a honed surface that will have a subtler look. If you run your finger over the stone, it feels more like natural rock—not rough, but not perfectly smooth. Though a very intriguing finish, it is much harder to clean and maintain than a polished surface because of the indentations. Extreme heat is applied to the surface of the stone, which causes the crystals to “pop” and create indentations.

It’s a great choice for kitchens, as it’s the easiest to clean and maintain and most resistant to stains. Because it is slightly more porous than a polished surface, it requires a little more diligent cleaning, but as long as you are careful you’ll be just fine. A leathered surface has no reflective properties whatsoever, and is very textured. This look is achieved using diamond brushes that mottle the surface layer.

This type of finish is especially popular in areas where you want to prevent the surface of the stone from being slippery, such as for stairs, poolsides, or walkways.

Natural Stone Surface Finishes by mgtstoneco.com

Polished tiles are used for interiors as well as bench top and counter top, but it is not suggested for outdoor since it reduces slip resistance. A honed finish refers to any level that is less than polished and therefore the surface is smooth but dull or slightly reflective. The result is a slightly undulating surface, very soft, warm and smooth to the touch. Additionally, it closes the pores of the stone (compared to honing) and retains the color better than honing.

This type of finish is usually applied to sandstone and is one of the finishes you can choose for exterior. This is an aging process similar to the one applied to achieve an antique finish. After this treatment, the colours of the natural stone become more vivid once again. The result depends on the size of the hammer and the number of points on the hammer. It gives a worn look to the stone and also stimulates its further aging over time.

It produces a somewhat rough and irregular surface with small furrows and undulations. The sawn surface is generally smooth but probably some “blade / saw markings” can be seen on the surface of the material. The grooves always run parallel, the distance between them remains constant. Depending on the type of chisel used and skill level of the person using it, this can provide a very rough surface or a slightly irregular finish. The good news is it can be applied retrospectively, meaning that you can change the look of an already installed countertop, for example. First the stone is honed so that it has a smooth surface to which the resin can be applied. Meshed – this is mainly an additional step to make the stone stronger, used mostly for defective marble or stone slabs. In a nutshell, this is the process of protecting already installed tiles by treating them with the respective substance. The stone is sold as extracted from the quarry, once cut into the desired format.

The process of polishing is by repeated application of abrasive treatments. In areas with a lot of foot traffic, floor tiles are often honed and not polished.

A leather finish is obtained by a process of brushing the slab with a range of brushes. A finish can be applied to variety of stones to give them the impression that they have been walked on for centuries. In this case, natural stone is introduced in a vibrating drum-like machine with smaller, more resistant stones that wear the tile completely. The resulting surface is rough, non-slip and generally faded in color, thereby hiding defects and tone variations.

The surface looks slightly rough, depending on the original finish. A mechanical hammer hits the stone and leaves small indentations on the surface. The result leaves the surface of the stone smooth with small indentations. A chiseled finish is created, as the name implies, by breaking a stone with a hammer and chisel. Acid wash is an alternative way to achieve antiqued look and it also can have similar results as the water finishing. Epoxy treated – it is a multi-step method that combines several techniques.

Then it is dried in a special oven and the process of applying resin and drying is done one more time. The process improves the visual characteristics and the resistance of the stone tiles. During the epoxy treatment of the stone a thin net of fiberglass or plastic is applied to the back side of the tile. Protective treatment – this is not an actual surface finishing, but rather the final step to protect the stone tiles by applying oil-repellents or anti-graffiti treating substances. The final look depends entirely on the characteristics of the stone and its exploitation.

My New Granite Vanity Top Is Really Rough [Archive] by johnbridge.com

Some are to be expected in certain stones, but only to a very minor degree. There are ‘pits’ but that’s understandable because it’s a natural material and only noticeable very close up.

I don’t feel like you’re being “too picky” because when you spend that much money on remodeling, you have every right to be happy. I didn’t want to seam it that way because of the directional movement in the stone. On a piece that size, the grain would go 2 different directions wouldnt it? Corner starts off at a 45 degree angle then heads off at a right angle.

Stone being a natural product with natural defects is a truth that is utilized to the max sometimes. It basically feels as if a woodworker used polyurethane but did not sand between coats – very rough and gritty. It had quite a few small pitts in it, but was smooth to the touch.

Granite Countertops by mamapedia.com

It seems to me that the granite is much more cloudy in some areas than it should be.

Granite is polished to create the beautiful finish so you could be looking at a polishing imperfection or it could be part of the stone itself. If the cloudyness/inconsistency is part of the stone you’re probably less likely to get any solution because your contractor would have to get another slab installed. If you did choose them you’re probably completely out of luck.

You pay enough for everything, it truly should be just how you like it. Even if it’s just a tiny amount, do you really want your kids exposed to radiation? Otherwise they will have a cloudy film on them that leaves fingerprints and it drive me crazy.

It is consistent for there to be imperfections in the surface for example, small areas where the surface feels slightly rough because there was a void in the stone. The contractor should have had you choose the actual slabs yourself, then you wouldn’t have these types of issues. I would start by getting an independent contractor who is not involved at all to look at it and tell you if it’s right or wrong and what can be done. If you don’t get it right, every day when you are in the kitchen, (and we are in them alot right?

Sources:

Leave a Reply

Your email address will not be published. Required fields are marked *