We can enhance appearance and give back life to almost any old marble fireplaces.

Over time any fireplace can loose its initial condition and become unacceptable dirty.

AirStone Fireplace Makeover On A DIY Budget by inmyownstyle.com

There are also wide stones in each box so that you can create a realistic stone facade. Remove the stones from the boxes so they can acclimate to the air temperature as well as allow you to see the variety of shades in each box. You do not want the edges of the stones to line up – cut them with a hack saw if necessary to vary where the edges fall.

How To Paint/ Update An Old Stone Or Brick Fireplace Or Wall. | Duration 7 Minutes 46 Seconds|
Youtube Channel:Scott Riddle

For a wall installation start at the ground level and work horizontally. To attach the stones – use a putty knife and a thick coat of adhesive to the back of the stone like you are icing a cupcake, not buttering bread. If you get adhesive on a stone – use a wet rag and warm water to clean it off. Make sure it is a snug fit and even bows a bit so it holds up the stones while they dry. We have used the fireplace in the new house a few times so far and there have been no problems. I will be using in it again in my next house if it doesn’t have a stone fireplace.

I want a real stone look for our 32″ log fireplace but it has been a problem getting that done & so for years just left the plywood as is. I want to remodel so the chimney becomes a two story stone look the height of the great room. Second, maybe we were using the wrong kind of blade in our saw, but it was not as easy as cutting bread. It was so easy to cut the stones, truly like cutting into a french baguette. We don’t use it because it does provide heat since the heat escape through the chimney. We tape up the fireplace in the winter to reduce heat lost and prevent cold air from the fireplace. To cover it in the winter, you could cut a plywood board that fits snugly into the opening.

It isn’t high-end, big, or trendy – just a house that has all the components to fit with my personal style. Clean the surface that you will be applying the stones to and let dry. I stacked stones to see how the mix of size and color variation would look before applying them. I drew black lines on the photo below to show you where they should be cut.

Natural Stone Fireplace Naples, Fl (Mountain Mist Stone) | Duration 33 Seconds|
Youtube Channel: Accent Masonry LLC

Then press the stone firmly onto the wall allowing adhesive to compress. I placed all of the stones across the opening of the fireplace, then pushed them up since they did slip down a bit. I added a piece of dollar store foam board cut a little larger than the firebox opening.

Here at the bottom – if it is not perfect – it does not matter as much. This fireplace went from boring brick to wow by using a piece of repurposed furniture to create the floating mantel. Using the exterior adhesive was much harder to use then the interior, but worked just fine. I hope this helps you make your decision as to whether or not you will use it. The natural edge stones are to use to place when you will see the raw edge of the stone. It has held up just fine with frequent used of the fireplace. Looking for anyone familiar with the limits of the refacing materials.

The chimney shoot door is closed but it not sealed so during the winter our living is really cold because of this fireplace.

Blog by bespokemarblefireplaces.co.uk

Black granite can also be cleaned with regular non bleach based cleaners. If any stains remain, then they have penetrated the surface of the marble, and the only way to remove the stains is to uninstall the entire fireplace and have it re-polished in a factory.

Stains on marble can be removed with regular non coloured soap (such as hand soap), simply rub the surface in a circular motion with warm water, and wipe off any remain residue.

Try polish the surface, with regular furniture polish, and this should remove further stains. Many firms and handy men would suggest trying to polish the fireplace on site with a buffer, however we would strongly advise against this as this will make the fireplace polished in different sections and in most cases will emphasise the scratch or stain.

Fireplace Surround Facings by designthespace.com

Granite is the most durable and stain resistant of all stones and requires less routine maintenance. There is a slight mitre/bevel on the corners that normally show after the installation of a full fireplace mantel. Our marble and granites are 3/4″ thick and the side edges visible after the installation of a full fireplace mantel are automatically polished.

All stones should be sealed on at least an annual basis, and our marbles and granite facings are polished to a semi-gloss finish. We offer two standard sizes of facing systems and can custom cut these to fit most fireplaces.

How To Clean A Marble Fireplace by ehow.co.uk

Often thought to be extremely porous, easy to stain and hard to care for, marble doesn’t have to be any of those things.

If the stain you want to clean on your marble fireplace is dry, dust the surface of the marble with a dry, soft rag until it is free of any debris. Dip your sponge in the hot water, soak it and wring out the excess. For stubborn stains that resist cleaning with a damp sponge, use a speciality marble cleaning product. Do this until the stone glistens but does not feel wet to the touch.

The beauty of marble has made it a preferred decorative element, and its surprising durability has made it a good choice in constructing fireplaces. A porous cut of stone can be sealed, and you can clean most stains from a marble fireplace with relative ease.

Chimney Rx Paint N Peel Fireplace Cleaner From Vimeo | Duration 1 Minutes 50 Seconds|
Youtube Channel: SaverSystems

Wipe the stain, don’t scrub at it, but wipe three or four times, blot dry with a clean rag and examine the marble fireplace to see if the stain is gone.

Using a clean rag, spread the sealant over the stone in a circular, polishing movement. Let the stones dry for at least 24 hours before using your marble fireplace. This will help keep your marble fireplace clean and resistant to stains. There is enough acid in vinegar and citrus to etch the finish of the stone and ruin the polish.

Before and After: Fireplace Makeovers by bhg.com

A full-scale renovation ditched the dingy carpet and created a true focal point fireplace. A simple white mantel sits directly atop the fireplace, now dressed in white marble subway tile. Tucked into a corner, with no eye-catching features, the fireplace seemed like a bit of a waste, especially given the natural light afforded by the adjacent window. A rustic wood beam mantel crowns the fireplace makeover and is ready to receive a display of beautiful accessories. Plus, the feature was in major need of a fireplace makeover, especially since there was no mantel at all! A two-sided insert added during the fireplace remodel means the fireplace can now be enjoyed in the living room and family room. A nonworking hearth is a great place to splurge on tile that would be too costly for refacing a fireplace that’s on the larger side. Cabinets below the shelves’ built-in niches offer hideaway space for personal items. The material is a smart budget pick to resurface a fireplace makeovers because it looks and feels like real stone but is less expensive, and because it’s lightweight, it requires no additional floor support. Painting the entire facade white adds to the coastal theme of the room, which was chosen to help play up the ocean view from this family room.

When the room underwent a remodel, a much-needed fireplace makeover was the first task. With the brass door gone, the remaining brick suits the room’s cottage style. However, the cream color of the fireplace blended into the cream walls, leaving the fireplace bland and overlooked. While some fireplace makeovers focus just on the hearth, this one considered the whole wall. Two chairs flanking the fireplace sets up a cozy seating area that’s perfect for a two-person conversation or a date with a cup of tea and a good book. The colorful tile on the fireplace facade provides the main source of color in the room.

The black of the fireplace door pops against the wood wall and unites the new fireplace facade to the black furnishings throughout the room.

How To Stain A Cast Stone Fireplace From 01tutorials.Com|
Youtube Channel: Christian Painters

The fireplace’s makeover style complements the rest of the space, which includes exposed wooden ceiling rafters and rustic doors and shelves. A touch of texture and fresh materials is what the fireplace needed to be a standout feature in this living room.

The stone fireplace makeover was as simple as adding sleek, stone tiles on the surround of the fireplace and adding a few accessories to the mantel.

Now that the fireplace is beautiful and appealing, the furniture surrounding it creates a cozy area to gather with family and friends. The bulky brown-brick fireplace did little to enhance the space, as it was placed asymmetrically on a long stretch of wall. Classic-lined built-ins integrate the fireplace, bookshelves, and an entertainment unit. Too much furniture and a missing focal point gave the room little purpose. Sandstone adorns the surround and blends beautifully with the built-in cabinets. Major updates were needed to bring this tired space into the modern age. A limestone hearth and rustic wooden mantel complete the fireplace makeover, which warms the room while providing a sweet, subtle focal point. This repetition of color and clean-lined materials gives the home a consistent, peaceful flow. The mirrored wall above and the brass fireplace look like they belonged in the 1980s. The old wood-burning fireplace was replaced during the fireplace remodel with a convenient, energy-saving gas unit.

The fireplace no longer dominates the room but instead sets the tone for a more cheerful family room. And the room as a whole was in major need of some lighter tones and new brick fireplace ideas. The former uninspired mantel was replaced with a shapely full-surround composed of crown molding and fluted pilasters. The flanking shelves also received crown molding and new doors, and the bottom shelves were converted into charming storage benches.

Less Than 1 Hour Installation Three Piece Dracme Cast Stone Fireplace Mantel 1 877 990 8635 | Duration 6 Minutes 1 Seconds

And a white color palette gave the fireplace little room to stand out. And a lack of a mantel makes it hard to incorporate the vertical space above the fireplace.

These remarkable fireplace makeovers and remodels feature new mantels, fabulous surrounds, fireplace tools, and cozy hearths. The nondescript fireplace was an afterthought at best, another eyesore at worst. High-temperature spray paint gave the dated firebox surround a fresh finish. Inside the fireplace, fire glass shimmers, enhancing the spark of the newly revived fireplace. But graphic fabrics—including zebra-print bolsters on the slipper chairs—keep the look fresh.

A dull color palette gave the fireplace little chance to stand out. With no mantel and a lackluster surround, this hearth was in major need of a fireplace remodel.

New bookshelves provide opportunities to display collectibles and other decorative items. The combination of the outdated walls, dark wood floors, and red brick fireplace made this space dark and uninviting. And with no practical reason for the excessive number of shelves, some drastic fireplace makeover ideas were necessary. These pillars transform the fireplace into an elegant focal point for the room and help the fireplace stand out in front of the shelves. The focal point in the room was a giant, lackluster fireplace. Coupled with an intricate hearth, the room as a whole was too stuffy. Devoid any personality, this space needed a drastic fireplace makeover.

The black and stone combination gives the fireplace refacing an upscale look and feel.

When the homeowners decided to finish the room, they thought installing a fireplace between the two large windows would be a perfect addition to the room. The wood on the fireplace was in bad shape, as was the brick fireplace surround, and the homeowners had to come up with a creative solution to turn something worn into something beautiful. An ill-placed statue drew some attention to the space, but not in a good way. The smooth stone pops against the white walls and molding because of the stark difference in texture and color between the two elements.

Stone Fireplace Makeover | Faux Black Granite Paint Technique | Paint Over Tiles | Duration 4 Minutes 6 Seconds

The surround, built-ins, and walls were also painted white to brighten the room and layer on the cottage charm. Custom-built cabinetry flanks the fireplace, keeping media equipment organized and out of sight. The new fireplace can now be seen from the adjacent dining and living room. This unattractive area—along with dated wood paneling and cement flooring—restricted the basement to a storage space rather than a living space. A redo for the fireplace would require a little oomph to match the grandeur of the great outdoors just beyond. The tone and texture of marble was carefully selected to match bamboo flooring, natural stone, and maple built-ins seen throughout the home.

However, it was completely out of scale with the room because it towered uninterrupted from the floor to the ceiling. A wood mantel—fashioned from an old decorative ceiling beam—provides the perfect accent for the rustic surround. Because the fireplace and mantel were in good condition, all they needed was a fresh coat of white paint to blend with the style of the room. The updated fireplace also brings a warm, cozy look and feel to the soaring sitting area.


Leave a Reply

Your email address will not be published. Required fields are marked *