Start painting by dipping the sea sponge into the lightest gray paint and dabbing it on to create the light/dark marble variations. Occasionally flip and push the feather (rather than pulling it) to create natural looking veins. Sponge over any of the veins with the lighter colors to soften the vein or create a feeling of depth. Sponging over areas actually works to your advantage, as it makes the veins look deeper and more natural.

You don’t want any epoxy build-up on them or the countertop might not fit back into place.Smooth out the mixture as best you can and let it run right off the edges.

It will level as it sits, and you have to work quickly to get it spread before it begins to set up. It’s supposed to be very easy to work with and looks very real. However, with magic eraser i’ve been able to wipe it clean every single time!

Do you recommend all the same products or have you seen anything for black marble effect?

I would plan on doing the sink without the veining (just white) but will the epoxy work on the sink since it is not a flat surface?


My Marble Look Countertops For A Fraction Of The Price | Duration 4 Minutes 58 Seconds

I suggest painting a couple of sample boards to get comfortable with the technique and learn what look you like. Then lightly dry brush the vein with your cheap bristled brush to soften it. It really does look like natural mineral deposits on your faux marble!

Place a good drop cloth beneath the project to catch all the runoff — the resin will not come off anything it comes in contact with. Anything you use to spread it will have to be thrown away, so use something disposable. Be sure to check all the edges and so everything is covered. If this process still makes you a little nervous, we’ve heard really great things about this gray granite/marble contact paper that sticks directly to counter tops. I will sand it down today and add another coat to see how that goes….

Which Granite Looks Like White Carrara Marble? by countertopspecialty.com

But kitchen countertops need to be functional and the extra maintenance of marble is irritating to most homeowners. It’s a good one to take a peak at in your local stone warehouse.

Marble Look

Names of specific varieties are not always strictly applied and you may find wide variation in the look of any stone with the same name or stones that look identical but with different names.

You want to hunt stone warehouses for a slab with the color, tone and pattern you like regardless of the name. More likely is that a marble slab was mislabeled as “quartzite” since they can look very similar. But again, this is probably how you’ll discover that you have marble and not quartzite. To pick the perfect quartzite slab perform the lemon juice test as noted above to weed out those that etch. The color / pattern won’t show through as much as a polished surface, and a honed finish is more prone to staining, but etch marks are less visible. A polished finish is very stain-resistant, but etch marks are more visible.

You may think you can handle it, but later get sick and tired of the extra care. Good luck with the warranty department on that and it’s more expensive overall. The granite took on darker shades in high use areas where it is stained.

You may have gotten a bit lucky with yours, sealed it well and have cleaning habits that don’t let spills sit for too long. But acidic foods and drinks etch marble countertops leaving dull spots all over creating extra maintenance. Luckily, if you want marble countertops but not the maintenance problems, you have alternatives.

Which you prefer will color your choice of the alternatives. This test will tell you how absorbent (prone to staining) the stone is and if it is sensitive to acids like marble. The veining does tend to be dense and the color is usually a touch on the gray side.

You may even see it called “granite” instead of quartzite.

We see this with granite, marble, and all natural stones. Looking for a specific color name is a good place to start, but ultimately the name doesn’t matter. Again, marble countertops are only a problem in the kitchen due to all the acidic foods and drinks. Carrara marble alternative countertop materials presented above. Any etching can be repaired by gently rubbing with fine furniture grade steel wool. It can’t be repaired like natural stone, it has to be replaced.

We started out being very careful in cleaning and polishing it but then got too busy (or lazy).

You don’t even realize it at first until you look at low use areas (like corners or under appliances) that are much whiter and brighter. And our family with 3 kids is extremely hard on our kitchen. It has a very obvious ‘repeat’ pattern unlike natural stone, it has none of the shine of granite or marble (but much more a synthetic sheen like laminate), it feels warm and artificial (like laminate). It’s considered entry-level granite, but it’s not boring like other types of granite in the same category – the gray and sometimes dark purple veins give it character. One of a very few granites that just should never be installed since it will stain so easy.

Kitchen Countertops by classyglamliving.com

Statuario marble is the most valuable of all marbles – the whiter a piece of marble, the more valuable it is!

We’ve contemplated a lot through the months and have decided we really love the look of marble countertop and backsplash. There’re so many applications for this product, we’re so excited about it!

Caesarstone with such a white background to imitate marble veining.

Kitchen Countertop Options: Quartz That Look Like Marble by thesweetestdigs.com

Specifically, quartz that look like marble – that gorgeous gray and white carrara marble. Depending on your budget, needs of your household, and your style preference, your choice here is going to vary. After considering all of that, the choice to go with a quartz was pretty clear. No having to seal it annually like granite, or worry about spills and staining like a marble. Once you get into the world of quartz manufacturers, there are tons of choices. There is nothing better than seeing something in your own space – way different than in a showroom under fluorescent lighting. I have included bigger screenshots of each countertop option below, although seeing it on the computer definitely isn’t quite the same as going and grabbing an actual sample piece. They all had a fair bit of white in them, and didn’t have the flecks or speckled look that you often find in quartz.And of course, it was the one that was by far the most expensive.

You can check out the whole kitchen before & after reveal for waaaayy more photos!

I know this is an older post but it’s my inspiration for our renovation. All the reasons you gave for not going with granite or marble were ours also. I asked where we could go to see some slabs and saw his pick first thing. The elimination process was hard, but we narrowed it down to 2, with price finally being the deciding factor.During our own kitchen renovation, choosing the countertops was just about the hardest decision. I don’t think there are any “bad” choices – just different options to suit different needs. I like the veining that you find in stone, but didn’t want it to be overly busy.

We wanted something that would stand up to kids in the kitchen and would be as maintenance free as possible. It is an engineered stone, so you can get that look of veining as you would in a natural stone, but it is super durable and maintenance free. Maybe too many, as it makes the decision process hard!

All of these manufacturers are reputable, so price would definitely help us narrow it down. It’s such a major decision that seeing it on a small scale and on the computer wasn’t enough. The counters are bright and read like a nice white from a distance. Oh, and the seams (we have 3 in our corners) are barely noticeable. Such a pretty shade of blue and the gold hardware ads a nice contrast!

Your advice to go see the selection in person is so right on.

Current Obsessions: 5 Beautiful Marble Look Quartz Countertops by msisurfaces.com

With proper care, and the right sealants and care, a marble countertop is a beautiful choice for any home or commercial property. A charming choice for counters, statement islands, and backsplashes, this beautiful gray quartz naturally enhances the architectural aspects of any space. With a look that resembles natural marble or granite, this elegant quartz is timeless yet modern, making it an ideal choice for a variety of aesthetics and applications, from sweeping islands to dazzling accent walls and backsplashes. A natural stone with characteristic veining and a bold, white backdrop, marble is an elegant option for modern and classic aesthetics alike. However, since marble is a porous stone, it can absorb spills over time if not sealed. A marriage of natural minerals and current technology, modern quartz is highly durable, with the sparkling beauty of a natural-looking stone. If you crave the coveted look of marble without the upkeep, quartz serves as a functionally beautiful alternative. For the lovely look of marble without the maintenance, marble-look quartz is equally elegant in homes and commercial properties alike.

Current Obsessions: White Quartz Countertops That Look Like Carrara Marble by msisurfaces.com

Marble is as beautiful as it is delicate, and many people aren’t willing to invest in a costly countertop that requires so much up-keep. Man-made modern quartz is non-porous and extremely hard, making it resistant to bacteria, staining, and chipping. However, marble doesn’t come without some drawbacks, namely a high-maintenance care routine that just doesn’t fit in with a busy lifestyle. Consider opting for white quartz countertops that perfectly mimic the look of marble without costly and inconvenient re-sealing and maintenance. Even though marble is widely revered, quartz that looks like marble can fool even the savviest shoppers. A silvery grey ground and warm gold veining combine to create a quartz countertop that has all the sophistication and glamour of the finest marble without the hassle. The neutral color palette has mass appeal and works well with most styles of decor, while the bold pattern on this slab makes a major impact in any space.

How To Make Concrete Countertops Look Like Marble by hunker.com

Practice your marbling technique on scrap paper or cardboard first to build confidence, which adds realism to the look of your finished faux marble countertop. Find the marble coloring and texture you like, and keep an image of it close by as you try to duplicate it on your counter tops.



Epoxy Painting How To Paint Laminate Countertops Marble (Part 1) | Duration 6 Minutes 45 Seconds

Drop a two-foot by two-foot section of plastic drop cloth into the glaze, shaking off any drips as you remove it. Repeat this process, using fresh drop cloths each time until the surface is covered with this texture. The color of veins is up to you; marble veins can be lighter or darker than the base coat. Lightly touch the tip of the feather or dagger brush onto the glazed surface, and try to duplicate the size and direction of veins in the image. Faux finishing techniques allow you to change the look of the sealed counter top to emulate other materials such as marble.

You can have something that’s high-contrast, or something that blends nicely with the surroundings. Wear rubber gloves while doing this, as it can be quite messy.

You can also practice on a piece of paper beforehand if you’re feeling uncertain.

Choosing A Countertop Material by stonesource.com

Some people prefer a surface that will remain relatively unchanged over time, while others enjoy the inherent imperfections that come along with many natural materials. In this guide, we’ll help you determine what to expect with various countertop materials, so you can make the choice that works best for your project. They purchase new, modern furniture and appliances and install a 10’ island in their kitchen. The couple, who wanted a pristine countertop for their pristine home, becomes disappointed with their selection and is frustrated to learn about the maintenance required to restore it. It will etch when exposed to acidic foods such as lemons or tomatoes. Therefore, dark marble is not ideal for kitchen countertops. Basalt will stain when exposed to oil and highly-pigmented liquids. Some granites are resin-treated to enhance the color and fortify the surface of the stone. It will stain when exposed to oil and highly-pigmented liquids. All schists have a low abrasion resistance rating and are likely to scratch. To reduce the appearance of etching in kitchen countertop applications, choose a honed, white marble with a low-moderate absorption rating. If acid etching is an issue, choose a material with a minimal acid sensitivity rating. The quality of the repair is dependent upon the factory of origin, the fabricator of the stone and the installer. To reduce the appearance of staining in kitchen countertop applications, always wipe up spills immediately. Do not use resin-filled material outside, as the resin will discolor over time. Always use a grout that is similar in color to the stone to avoid a picture-frame effect. It can be used outside for countertops and requires minimal maintenance beyond cleaning the surface.Or, as we like to say, they appreciate that natural materials are perfectly imperfect. Marinara sauce (an acidic food) wears away and dulls the finish. To this couple, the white marble doesn’t look worn or imperfect. Just as we saw in the first example, wine spills and stains the counter, lemonade splashes on the surface and etches it, and platters drag across the surface and scratch it. When a person expects their kitchen countertop material to look relatively the same over time and wants a material that will require less maintenance, they are generally happy choosing an alternative to white marble. The “best” material for kitchen countertop applications is completely dependent upon the preferences of the owner. Whether white marble or alternatives to white marble are preferred, it’s important to know that all natural materials must be sealed prior to use and must be maintained over time. However, removing wine stains from marble is relatively easy to accomplish. This etching is less apparent on white marble and more apparent on dark marble. To reduce the appearance of staining, always wipe up spills immediately. For marble with a lower abrasion resistance rating, expect the material to patina. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.



Turn Plywood Into Marble Countertops, Diy Epoxy Countertops | Duration 31 Minutes 10 Seconds

Choose cement-filled or unfilled materials as an alternative. It’s engineered to look like marble, concrete, metal and solid surfaces. Each of these popular countertop materials is stocked in one or more of our warehouses.

Wilsonart 4 Ft. X 8 Ft. Laminate Sheet In Calcutta Marble With by homedepot.com

Old laminate comes off fairly "easy" with the right tools. However you need to make sure you always use a thick cutting board if you paint your countertops. I know the length and width of the counter, what is the depth?

A lot easier to install than we expected, but definitely a two person job when handling big pieces. And whatever pattern and color you choose for your kitchen countertop bathroom vanity laundry room or garage worktop the beauty and easy maintenance will be yours at a price you can celebrate. A new look is yours for less, leaving you with more to spend on special extras. I need the actual depth, so i can determine my finish counter height.

We are very happy, everyone thinks we hired experts.

We also had a little play with positioning it perfectly since we used an extra amount of contact cement.

Faux Marble Countertops DIY Earnest Home Co. by earnesthomeco.com

I felt like all the black cabinetry and wood might start getting really really dark. I spent about an hour with a wooden skewer picking bugs out of the glaze. I just set up a stool outside and sat there for 2ish hours picking out any bug that flew into my glaze. Many kudos to you for having the patience for such a project!

Wouldn’t that look good with our new black appliances?

Thanks for a wonderful solution to my counter top dilemma!

You can buy large marble tiles for around that same cost per sq ft if you hunt them up. I dream of marble….and now am seriously tempted to try this. I mixed three different levels of gray paint (by adding more or less white) and got out a sea sponge and a feather. I painted back over the entire thing with white and started over again. I made sure to spread over the edges and get them covered as well. Then, once it was dry enough to carry, we carefully carried it inside. It took a lot of layers and patience, but in the end wasn’t too hard!

I think it would be so loving of you to do our countertops for us. I need to find a place for some faux marble in my home 🙂 thanks!

Did you have a piece of marble to use as a sort of pattern and example?

I painted over the white and started over, so that was my practice!

Totally impracticable for more than an itsy amount of counter. I think, in retrospect, that it may have darkened our kitchen up a bit too much. How do you think it would be to do the entire kitchen?

How To Create A Faux Marble Countertop Using Concrete by homedit.com

You’re going to absolutely love the finished product of a faux marble concrete countertop. It helps to keep the wall free from concrete splotches, but you have to remember to remove the tape while the concrete is still wet, or it will be a pain to remove. It likely won’t show through after five or six layers, but on the off-chance that it does, white is a good way to go. Measure and pour the powder into a large disposable container.

This will help to keep your drain clear of the copious amounts of dust that occur with the sanding you’re about to do. Be sure to wear a mask and protective eyewear for this step; the dust is going to get everywhere. This way, you can watch the level of sanding (view the line where sandpaper touches the concrete) for most of the wrist rotation and adjust your sanding pressure accordingly. Don’t worry about getting this layer perfectly smooth, as you want some grey to come through to create a marbling effect. Use your finger to smooth out the corners where countertop meets wall, as these joints are hard to sand smooth. This is really a subjective decision – if you want less grey, add thicker layers of white. That’s not what we’re going for – marble doesn’t work that way. When you find a spot you like, with the grey showing through in a way that really resembles marble, do your best to leave it alone. This doesn’t look like marble, so it’ll be redone with another layer of white as well. Repeat as many times as you’d like, actually – it doesn’t hurt anything to add layers to cover up mistakes. To be honest, there was very little excess for me to wipe up. It’s important when working with acrylacq to keep a wet “edge” to your brush – the sealer dries relatively quickly, and brush strokes will show when your brush starts to get dry or you are trying to apply too little of the acrylacq.

Leave a Reply

Your email address will not be published. Required fields are marked *