But what happens if your beautiful white marble begins to turn yellow? In extreme circumstances, the marble can turn a brown color, akin to what happens to a piece of iron left out in the rain. It’s also a good idea to test the marble for moisture if it has been soaked with water. There are also some new products that are aimed at removing iron oxidation.

This can sometimes be reversed with a powder marble polish and if not, the floor will need to be honed by your stone and tile care professional.

When exposed to water, acids or bleach, the iron in the stone will begin to oxidize and turn it yellow. To find out if your marble contains iron, you can have your stone tested by a lab. If you’ve had a pipe burst or excessive water has been used on the marble floor, have your water tested for iron, especially if you’ll be cleaning with it. If oxidation is indeed your issue, preparing and applying a poultice solution may rid the yellowing from the marble in some cases. Consult with your stone restoration contractor for poultice mixtures or other products that may work best for your situation. As the polished surface wears away, trapped dirt in the marble’s pores can give the stone a yellow appearance.

This type of yellowing may possibly be removed with a professional cleaning with a heavy-duty stone cleaner. In this case, the floor will need to be stripped to attempt to remove the color produit pour remplacer le viagra. If your marble contains any moisture when this type of polishing occurs, the stone will begin to yellow.

Marble Goes Yellow by master.co.th

Internal sources are the solubleminerals naturally occurring in the stone. Most of the internal iron occurs as iron sulphide bearing minerals. Bleach, as an oxidiser will set off the iron creating yellowing of the stone. So the result of all this chemistry is that we get a yellow stone and, if the sulphate/sulphuric acid phase occurs, a stone that can etch itself due to it’s own acid production. The use of bleach as mentioned above promotes oxidation of any iron. Crystallization materials can also create the problem if not totally neutralised and are especially problematic if the stone is too wet.



How To Get Stains Out Of A Marble Countertop | Duration 1 Minutes 41 Seconds

So it is prudent to clean coatings regularly and re-coat when necessary. Some timbers used in flooring have natural gums and resins as well as chemicals used in their treatment that can migrate towards the stone’s surface causing discoloration. Some of the older cutback adhesives used for carpet and vinyl flooring can turn a stone yellow.

Most are two part and it is the unreactive part that when not mixed completely with the reactive hardener can migrate into the stone in moist conditions causing a yellow-brown stain. So as you can see it is not only iron that can turn a marble yellow.

Iron is the most well known but least understood cause of yellowing. External sources include iron bearing minerals in the substrate, installation materials, surrounding fixtures, water supply as well as building rubbish such as abandoned nails etc. Although we are all aware of the problems associated with the use of acid on marble and limestone many people do not know why household bleaches are not recommended. Once the iron has oxidised the iron sulphide oxidises to iron sulphate and then to iron hydroxide (we know it as rust). How about the other less documented causes for turning marbles yellow because the yellowing is not always rust or iron. If the stone is polished using steel wool any particles left on the surface will create rust.

If acidic polishing compounds are not correctly neutralised this can crate a yellowing. Wax build up or other topical sealers such as urethanes can turn yellow. Coatings can also appear to turn yellow as they trap dirt in their worn surface.

Dyes from rubber mats or the jute backing of some carpets will turn a marble yellow.

Why Does White Marble Turn Yellow ?JMC Stone and Tile Care by jmcstoneandtilecare.com

Over the weekend one of the water pipes broke in a bathroom and completely flooded the home. Beside warped wood, soaked drywall and an irate homeowner, the marble tile seemed fine except for some minor water spotting. At first he thought it might be some type of residue so they tried cleaning the marble with some bleach and water but the yellowing was still there. If improper cleaners are used, this dirt begins to accumulate in the pores of the stone can will turn yellow. Floors are mopped with strong cleaners or wax cleaner combinations or with no cleaners at all. It may be necessary to repeat this procedure several times to remove all the imbedded dirt.

As the coating builds up it becomes soft and dirt is easily embedded in the soft layer. Another possibility along these same lines is that process sometimes used for polishing marble floors is known as re-crystallazation. These strippers often require the use of abrasive pads which can scratch and damage the marble surface. If the marble tile has been recrystallized, it will be necessary to remove the recrystallized layer. If these techniques fail to remove the yellowing then proceed to the next possible cause.

It is for this reason that we recommend not using white marble in a shower.

This oxidation process is accelerated when the tile is saturated as in the flood in the above example. If you expose a brand new nail to water and air it will turn brown and rust. The process is difficult to reverse and replacement of the tile may be necessary. Before testing this procedure it is important to first determine if iron is the cause.

If any amount of iron is detected then it is possible iron has entered the stone through the water supply. If iron is present naturally in this stone, it will probably be detected in the spare tiles. We will mix a solution in water and apply to the effected tile, and allow the solution to soak into tile and kept wet for several hours. New installations should be sealed with a good quality penetrating sealer (impregnator) which will help prevent oxidation of the iron by eliminating moisture. The good experience started with him showing up at the scheduled time. He applied several coats of sealer to the granite tops to insure a quality job. He not only repaired the crack but resealed all of our other countertops too. He took the time to explain different options and even showed me a small area before he continued with the entire floor. He spent hours prepping, cleaning, enhancing, and sealing our slate. He changed our dull, chalky looking slate by giving it a brilliant luster that enhances our home.

There are very few marble and stone care professionals in this area. He is very thorough and careful, doing a great prep job to prevent any damage. Needless to say it was very noticeable and would have caused us to replace an entire slab of granite if we had not had it repaired. He was meticulous in his work, was able to match the color of the granite and it looks 100% better. He arrived exactly on time, even though he had to drive an hour to reach us. After realizing the size and scope of the grout sealing project we decided to contact an expert to get an estimate.

I can sleep better at night knowing that our expensive new flooring is protected for many years to come.

He told me he was building a two million-dollar home and had installed nearly 3500 square feet of a white statuary marble tile.

They managed to vacuum all the water and started to assess the damages. After several weeks the replacement of warped wood and drywall was completed, but he noticed the white marble had turned yellow in many areas.

Meanwhile, the homeowner was getting more and more irate and was threatening a lawsuit.

Although flooding is a common cause there are several other reasons this color change will occur. The wearing of this polish causes the surface to become rough and become a magnet for dirt. Mops used to clean the restrooms and/or kitchens were also used to clean the marble floors. Be sure the stone cleaner you buy needs to be alkaline and not an acid since acid cleaners will dull the polish. If this process is applied to a white marble floor that contains moisture it will turn the marble yellow. If you do try it yourself, before undertaking the entire project perform a small test to determine results. This layer can often be removed by a professional polishing the tile with a powder marble polish containing oxalic acid. It is strongly suggested that the polishing and honing procedure be performed by trained individuals. If iron is present in the marble tile, it will begin to oxidize when exposed to water or other oxidizers such as acids and household bleach. White marble tiles can remain for years without yellowing then over time may slowly turn yellow, and in severe causes, may turn completely brown.

If a flood has occurred or excessive water was used first check the water for iron. If there are spare tiles that have never been installed it would be a good idea to also have them tested for total iron. If the tile contains water, it is very possible that iron is beginning to oxidize. Be prepared to expect that the marble may need to be repolished since these chemicals can etch marble.

After 24 hours remove the poultice paste and rinse the area with water and a chelating agent. He spent hours sealing the grout for over 2, 000 sq ft of floor tile. He not only repaired the crack but resealed all of our other countertops too. He spent hours prepping, cleaning, enhancing, and sealing our slate. He changed our dull, chalky looking slate by giving it a brilliant luster that enhances our home. He took the time to explain different options and even showed me a small area before he continued with the entire floor.

He is very thorough and careful, doing a great prep job to prevent any damage. There are very few marble and stone care professionals in this area.

In addition he resealed and polished all the rest of our granite countertops. He will certainly be someone we contact again if we need any more restoration or maintenance on our granite. Since we did not have any furniture in the house yet we asked if he could start the same day. He agreed to start sealing the grout near the walls where the heavy furniture would be placed and come back later to finish the job another day. When he was finished sealing the grout he also sealed our new granite counter tops. Also, at no point during the job did he attempt to up-sell us anything, as a matter of fact, he tried to lower his price once the job was finished but we wouldn’t hear of it.

Sources:

Leave a Reply

Your email address will not be published. Required fields are marked *